How to make a splint
Toggle: English / Spanish
A splint is a device used for holding a part of the body stable to decrease pain and prevent further injury.
Splint - instructions
The purpose of a splint is to hold still and protect a wounded body part from further damage until you get medical help. It is important to check for good circulation after the injured body part has been immobilized.
Commercial splints are often used to immobilize a body part in the treatment of various disorders.
Splints can be used for many different injuries. Any time there is a broken bone, stabilizing the area is important.
1. Care for all wounds first before applying a splint.
2. An injured body part should usually be splinted in the position in which it was found.
3. Find something rigid to use as supports to make the splint such as sticks, boards, or even rolled up newspapers. If none can be found, use a rolled blanket or clothing. An injured body part can also be taped to an uninjured body part in order to prevent it from moving. For example, you can tape an injured finger to the finger next to it to keep it immobile.
4. Extend the splint beyond the injured area in order to keep it from moving. In general, try to include the joint above and below the injury in the splint.
5. Secure the splint with ties (belts, cloth strips, neckties, etc.), or tape above and below the injury (make sure the knots are not pressing on the injury). Avoid over-tightening which can cut off the circulation.
6. Check the area of the injured body part frequently for swelling, paleness, or numbness. If necessary, loosen the splint.
7. Seek professional medical attention.
DO NOT make any attempts to change the position of, or realign, an injured body part. Be careful when you place a splint to avoid causing more injuries. Be sure to pad the splint well to avoid putting extra pressure on the injured limb.
If the injury is more painful after placing the splint, remove the splint and seek medical assistance immediately.
Call immediately for emergency medical assistance if
If an injury occurs while in a remote area, call for emergency medical assistance as soon as possible. In the meantime, give first aid to the patient.
The following require immediate medical help:
Bone that is sticking through the skin
Loss of feeling (sensation)
Loss of pulse or a feeling of warmth beyond the injured site
If any of these situations occur and medical assistance is not available, and the injured part looks to be abnormally bent, gently replacing the injured part back into its normal position may improve the circulation.
Safety is the best way to avoid broken bones caused by falling. Some diseases make bones break easier, so use extreme caution when assisting a person with fragile bones.
Avoid activities that strain the muscles or bones for long periods of time as these can cause fatigue and falls. Always use proper protective gear, such as proper footwear, pads, braces, and helmets.
Chudnofsky CR, Byers SE. Splinting techniques. In: Roberts JR, Hedges JR, eds. Clinical Procedures in Emergency Medicine. 5th ed. Philadelphia, Pa: Saunders Elsevier; 2009:chap 50.
Weiss EA, Donner HJ. Improvisation in the wilderness. In: Auerbach PS, ed. Wilderness Medicine. 5th ed. Philadelphia, Pa: Mosby Elsevier; 2007:chap 21.
- Last Reviewed on 06/04/2011
- Linda J. Vorvick, MD, Medical Director, MEDEX Northwest Division of Physician Assistant Studies, University of Washington, School of Medicine; C. Benjamin Ma, MD, Assistant Professor, Chief, Sports Medicine and Shoulder Service, UCSF Dept of Orthopaedic Surgery. Also reviewed by David Zieve, MD, MHA, Medical Director, A.D.A.M., Inc.
The information provided herein should not be used during any medical emergency or for the diagnosis or treatment of any medical condition. A licensed medical professional should be consulted for diagnosis and treatment of any and all medical conditions. Call 911 for all medical emergencies. Links to other sites are provided for information only -- they do not constitute endorsements of those other sites. © 1997- 2013 A.D.A.M., Inc. Any duplication or distribution of the information contained herein is strictly prohibited.
This page was last updated: May 31, 2013